Shopping cart

IC pneumatic forklift BX50 Series – 2024 models FG25T-16 & FG30HT-16 | Vancouver, BC

The BX50 IC pneumatic forklift combines Komatsu’s long history of rigorous engineering in construction equipment with features designed to increase efficiency and reduce operator fatigue.

  • Fuel efficiency helps lower costs
  • Rugged, construction-inspired drive train
  • Designed for higher efficiency through improved operator comfort

The new 5,000 Lb capacity propane Komatsu forklifts, 2024 model FG25T-16 & FG30HT-16 is here, contact us for a price quote on these IC pneumatic forklifts, we offer free maintenance for 12 months or 1,200 hours on these models.

The Komatsu Operator Presence System (KOPS) Plus, standard with BX50 series, locks out lift, lower, tilt and travel functions when the operator leaves the seat for more than three seconds. The forks cannot lower while the key is in the off position. High torque delivered by powerful engines is channeled through a heat dissipating aluminum transmission case and a rugged dust- and leak-resistant, double-seal U-joint design. The fully hydrostatic power steering (FHPS) system offers you easy steering even at slow speeds and is engineered to eliminate kickback. Further improving operator feel are a small-diameter steering wheel and optional spinner knob for one-handed control. Designed to improve operator comfort and reduce fatigue, the Komatsu Komfort Zone is a dual floating structure: dampening mounts protect the frame from engine vibration; additional mounts isolate your operators from the frame. Sealed floorboard reduces engine noise and heat. Hot engine air, dust and exhaust can affect operators over time. The BX50 series’ angled exhaust ports in the counterweight aim exhaust away while traveling in reverse. Exhaust vents low on the counterweight point away from the ground and don’t stir up dust. An unrestricted view of the fork tips and surroundings for the operator. The thoughtfully designed EZ view mast, console and low-profile dash provide outstanding forward visibility. Upper corners of the counterweight are angled for clear sightlines in reverse.

GENERAL FG20T-16 FG25T-16 FG25HT-16 FG30HT-16 FG32HT-16
Power Type LPG LPG LPG LPG LPG
Operation Type Sit-Down Sit-Down Sit-Down Sit-Down Sit-Down
Capacity @ 24 in Load Center 4,000 lbs. 5,000 lbs. 5,000 lbs. 6,000 lbs. 6,500 lbs.
Load Distance  From Center Axle
(2 Stage)
17.9 in 17.9 in 17.9 in 19.1 in 19.1 in
Wheelbase 65 in 65 in 65 in 66.9 in 66.9 in

 

DIMENSIONS FG20T-16 FG25T-16 FG25HT-16 FG30HT-16 FG32HT-16
Tilting Angle – 2 stage masts, Forward/Backward 6 / 12 deg 6 / 12 deg 6 / 12 deg 6 / 12 deg 6/ 12 deg
Tilting Angle – 3 stage masts, Forward/Backward 6 / 5 deg 6 / 5 deg 6 / 5 deg 6 / 5 deg 6 / 5 deg
Mast Height – Lowered 85.5 in 85.5 in 85.5 in 85.5 in 88.5 in
Mast Height – Extended 176 in 176 in 176 in 176 in 176 in
Free Lift Height 5.5 in 5.5 in 5.5 in 5.5 in 5.5 in
Maximum Fork Height 128 in 128 in 128 in 128 in 128 in
Height Overhead Guard 83.1 in 83.1 in 83.1 in 83.9 in 83.9 in
Length, with Standard Forks 141.5 in 144.5 in 144.5 in 148.8 in 150.6 in
Length to Fork Face 99.4 in 102.4 in 102.4 in 106.7 in 108.5 in
Overall Width at Drive Tires 45.3 in 45.3 in 45.3 in 48.6 in 48.6 in
Forks, Thickness x Width x Length 1.6 x 4 x 42 in 1.6 x 4 x 42 in 1.6 x 4 x 42 in 2 x 5 x 42 in 2 x 5 x 42 in
Carriage Width/ITA Class 41 in / II 41 in / II 41 in / II 41 in / III 42.1 in / III
Ground Clearance, Under Mast 5.5 in 5.5 in 5.5 in 5.5 in 5.5 in
Ground Clearance, Center of Wheelbase 6.3 in 6.3 in 6.3 in 7.5 in 7.5 in
Right Angle Stacking Aisle 104.1 in 106.1 in 106.1 in 112.4 in 114.4 in
Turning Radius, Outside 86.2 in 88.2 in 88.2 in 93.3 in 95.3 in

 

PERFORMANCE FG20T-16 FG25T-16 FG25HT-16 FG30HT-16 FG32HT-16
Travel Speed, Loaded/Unloaded 11.2 / 11.8 mph 11.2 / 11.8 mph 11.2 / 11.8 mph 11.5 / 12.1 mph 10.9 / 11.5 mph
Lifting Speed, Loaded/Unloaded 120 / 124 fpm 120 / 124 fpm 120 / 124 fpm 104 / 124 fpm 104 / 124 fpm
Lowering Speed, Loaded/Unloaded 98 / 98 fpm 98 / 98 fpm 98 / 98 fpm 98 / 98 fpm 98 / 98 fpm
Maximum Drawbar Pull, Loaded 4,000 lbs. 4,000 lbs. 4,700 lbs. 4,600 lbs. 4,600 lbs.
Maximum Gradeability 32% 27% 34% 27% 25%
Service Brake, Operation/Control Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic Foot / Hydraulic
Parking Brake, Operation/Control Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical Hand / Mechanical
Steering Type FHPS FHPS FHPS FHPS FHPS

 

DRIVE FG20T-16 FG25T-16 FG25HT-16 FG30HT-16 FG32HT-16
Engine Manufacturer / Engine Model GCT / GK21 GCT / GK21 GCT / GK25 GCT / GK25 GCT / GK25
Rated Output (SAE Net) 54 HP @ 2,700 rpm 54 HP @ 2,700 rpm 60 HP @ 2,700 rpm 60 HP @ 2,700 rpm 60 HP @ 2,700 rpm
Maximum Torque (SAE Net) 111 lbs.-ft. @ 2,000 rpm 111 lbs.-ft. @ 2,000 rpm 136 lbs.-ft. @ 2,000 rpm 136 lbs.-ft. @ 2,000 rpm 136 lbs.-ft. @ 2,000 rpm
# of Cylinders / Displacement 4 / 126 in3 4 / 126 in3 4 / 152 in3 4 / 152 in3 4 / 152 in3
Fuel Tank Capacity 15.3 US gal 15.3 US gal 15.3 US gal 15.3 US gal 15.3 US gal

 

OTHER FG20T-16 FG25T-16 FG25HT-16 FG30HT-16 FG32HT-16
Relief Pressure, Maximum 2,630 psi 2,630 psi 2,630 psi 2,630 psi 2,630 psi
Transmission Powershift Powershift Powershift Powershift Powershift
Sound Level 82 dB 82 dB 83 dB 83 dB 83 dB

 

 

Skip to content